Menú
Introducción:
ZG series motor vibrating feeder is a new type and energy saving general feeding equipment. This machine adopts new type vibration motor as the excitation source.
There are many advantages such as simple compact structure, easy to use and maintenance, continuous and uniform feeding, small trough wear, long service life a and so on.
Esta máquina a menudo se combina con un transportador vibratorio, una criba vibratoria, un elevador de cangilones, una trituradora, etc.
It is used in automatic distribution, quantitative packaging, automatic control of the technological process, which is the ideal feeding equipment of metallurgy, mining, electricity, building materials, chemicals, machinery and other industries.
Características:
El alimentador vibratorio se utiliza ampliamente en metalurgia, minas de carbón, beneficio, materiales de construcción, industrias químicas, abrasivas y otras industrias en equipos combinados de trituración y cribado.
El alimentador vibratorio se utiliza en el proceso de producción para distribuir materiales en bloques, granos y polvo de manera uniforme, continua o cuantitativa desde el almacén de almacenamiento o la tolva hasta el equipo receptor. Puede ajustar la cantidad de alimentación de forma continua y realizar el control centralizado y el control automático del proceso de producción. Puede alimentar cintas transportadoras, elevadores de cangilones, equipos de cribado, trituradoras, pulverizadores, etc., así como procesamiento por lotes automático, envasado cuantitativo, etc., y puede utilizar procesos de control automático para lograr la automatización de los procesos de producción.
The vibrating feeder has the advantages of simple structure, convenient operation, no need of lubrication and small power consumption, and it can evenly adjust the ore feeding amount. Therefore, it has been widely applied. It is generally used for loose materials. According to the equipment performance requirements, the design shall be configured to minimize the pressure of the material on the trough body. According to the manufacturer’s requirements, the effective discharge opening of the silo shall not be greater than a quarter of the width of the groove, and the flow speed of the material shall be controlled at 6-18 m/min. For materials with a large feeding amount, a ore blocking plate at a sufficient height should be set at the bottom of the silo. In order not to affect the performance of the feeder, the blocking plate shall not be fixed on the trough body. In order to enable the bin to be discharged smoothly, the inclination angle of the rear wall of the silo is preferably designed to be 55~65 degrees.
Principio de funcionamiento:
El alimentador vibratorio serie ZG es impulsado por un nuevo tipo de motor de vibración, que hace que el cuerpo del tamiz realice un movimiento alternativo lineal periódico a lo largo de la dirección de la ranura para lograr una alimentación uniforme y cuantitativa. El alimentador de vibración serie ZG se compone de un cuerpo de material, un motor de vibración y un dispositivo de amortiguación de vibraciones.
Installation, Commissioning, Use and Maintenance of Motor Vibrating Feeder:
(1) When using a vibrating feeder for batching and dosing, in order to ensure uniform and stable feeding and prevent material from flowing, it should be installed horizontally. For continuous feeding of general materials, it can be installed down 10°. For viscous materials and materials with large water content, it can be installed down 15°.
(2) Can be tilted down 15° for installation.
(3) After installation, the feeder should have a 20mm running clearance, the horizontal should be horizontal, and the suspension device should be flexible connected.
(4) Before empty commissioning, all bolts should be tightened once, especially the anchor bolts of the vibration motor, which should be re-tightened once for 3~5 hours of continuous operation.
(5) When commissioning, the two vibration motors must rotate in opposite directions.
(6) During the operation of the feeder, the stability of the amplitude, current and noise should be checked frequently. Stop it in time if any abnormality is found.
(7) Lubricate the motor bearings every 2 months, and lubricate once a month during high temperature seasons.
Parámetros técnicos:
| Modelo | Feed Material Size (mm) | Capacidad (t/h) | Modelo de fuente de autovibración | Modelo de motor de vibración | Potencia (kilovatios) | Vibrating Frequency (Hz) | Doble amplitud (mm) | Exciting Force (KN) | Ref. Weight (Kg) | Punto único Carga dinámica (Kg) |
| ZG-35-90 | 0-60 | 25 | WLZD-2*2.5-4 | YZO-2.5-4 | 0.25*2 | 25 | 2-4 | 2.5*2 | 174 | 30 |
| ZG-45-90 | 0-60 | 30 | WLZD-2*5-4 | YZO-5-4 | 0.4*2 | 25 | 2-4 | 5*2 | 184 | 30 |
| ZG-45-90 | 0-100 | 50 | WLZD-2*5-4 | YZO-5-4 | 0.4*2 | 25 | 2-4 | 5*2 | 235 | 38 |
| ZG-70-100 | 0-150 | 100 | WLZD-2*8-4 | YZO-8-4 | 0.75*2 | 25 | 2-4 | 8*2 | 342 | 50 |
| ZG-80-120 | 0-150 | 200 | WLZD-2*17-4 | YZO-17-4 | 0.75*2 | 25 | 2-4 | 17*2 | 372 | 60 |
| ZG-90-150 | 0-150 | 300 | YZO-20-4 | 2.0*2 | 25 | 4-6 | 20*2 | 606 | 80 | |
| ZG-95-150 | 0-150 | 400 | YZO-20-4 | 2.0*2 | 25 | 4-6 | 20*2 | 646 | 85 | |
| ZG-140-180 | 0-150 | 750 | YZO-30-4 | 2.5*2 | 25 | 4-6 | 30*2 | 1030 | 180 | |
| ZG-160-180 | 0-150 | 1000 | YZO-50-4 | 3.7*2 | 25 | 4-6 | 50*2 | 1156 | 200 |
Solicitud:
The vibrating feeder is often matched with vibrating conveyor, vibrating screen, bucket elevator, crusher etc..
It is used in automatic distribution, quantitative packaging, automatic control of the technological process, which is the ideal feeding equipment of metallurgy, mining, electricity, building materials, chemicals, machinery and other industries.
